Standard Air Cooled Air to Oil Coolers

There are two basic options when it comes to a standard or off the shelf air cooled air to oil heat exchanger or oil cooler. The first is a cooler only option, as pictured to the right. They are typically found on air compressors for such OEMs as:

Atlas-Copco

Ingersol Rand

Gardner Denver

Joy/ Sullivan

Quincy

to name but a few...

In our cross over section, you can find replacement part numbers for hundreds of original equipment manufacturers part numbers, with an easy search function by name.

In this section you will find nearly a hundred direct replacements. A direct replacement is where all dimension are exactly like the original. In the Ingersoll Rand section alone we have 29 coolers which are direct cross over replacements.

In the Ingersoll Rand section alone you will find another 39 which are standard replacements. A standard replacement is one which has the same heat transfer capacity as the original, but may be a little different physically. These are easy t0 install, and typically cost half the cost of the OEM.

The second option is to buy the oil cooler with more options, such as fans, guards, frames, etc. These can fit the same applications as above, just as a complete replacement. Or they can be used as stand alone heat exchangers for a wide, diverse range of applications. If you would like help with working up your options, please call. With all the different motors, fan guards, sensors, etc which are available, you have an endless combination.

So if you are replacing a unit, we will replace it to as close to exact as we can. If you are looking for a new application, instead of pages of options and graphs, our heat transfer design engineers will work with you to give you the most efficient and least costly option to meet your need.

Below are examples of the standard replacement options. But please look in the "Cross Over" section under your OEM, we may have a direct cross as well. Or, we could always make a direct cross for your unit.

standard air cooled transmission coolers

 

1 1/16" thick cores with "L" brackets on top and bottom for mounting.

Bar and Plate Oil Coolers Rated from 150 to 400 PSI

 

Dimension in inches

Part Number       A           B         C         D          E        F         G

5176                   13.00    10.25   5.95   15.05   11.65   1.96    2.00

5177                   18.25     15.50   9.15   20.30  16.90   3.56   2.00

5178                   21.38    18.62  12.36  23.42   20.00 4.17    4.00

Custom options also available

aluminum air to oil coolers

 

1 1/16" thick cores with "C" channel brackets on each side for mounting.

 

Bar and Plate Oil Coolers Rated from 150 to 400 PSI

Dimension in inches

Part Number       A           B          C          D          F         G

5179                   21.38    18.62   18.75   20.25    6.69    3.00

5180                  26.75   24.00  23.00  24.50    9.38    3.00

5181                   35.75   33.00  30.00  31.50   13.88    6.00

Custom options also available

vacuum brazed aluminum bar and plate, standard oil coolers

2 1/4" thick cores with "C" channel brackets on each side for mounting.

Bar and Plate Oil Coolers Rated from 150 to 400 PSI

Dimension in inches

Part Number       A           B          C          D          F         G        H        J

5628                  13.00    10.25   10.24   11.64    2.50    n/a      .75   1-5/16

5629                  18.25    15.50    15.53   17.00    5.12    n/a      .75   1-5/16

5630                  21.38   18.62    18.75   20.25    6.69   3.00    .75   1-5/16

5631                  25.00   22.25   23.05   24.50    8.50   3.00   1.12  1-5/8

5632                 31.56    28.81   30.00   31.50    11.78   6.00   1.12  1-5/8

Custom options also available

Aluminum air cooled heat exchangers

2 1/4" thick cores with flat brackets on each side for mounting.

Bar and Plate Oil Coolers Rated from 150 to 400 PSI

Dimension in inches

Part Number       A           B           C         F         G         J

5662                  35.75    33.00   36.35   7.88    n/a     1-7/8

5864                 40.38    37.62   40.65   4.19    8.00    1-7/8

5866                 43.88    41.12    42.75   5.94    8.00    2-1/2

5868                 47.75    45.00   49.20  4.88    9.50     2-1/2

5870                 50.75    48.00   53.50  6.38    9.50     2-1/2

5872                 55.00    52.25    53.50  8.50    9.50    2-1/2

5874                 61.35    58.58    61.00   5.67   10.00   2-1/2

5876                 69.25   66.50    69.60   9.62   10.00   2-1/2

Custom options also available

standard replacement aluminum air to oil coolers

Belt Guard After Coolers

With the belt guard after coolers no fan motor is required. These coolers mount directly to the compressor's belt guard. This allows them to use the free flow of air from the belt guard / compressor's pulley's on reciprocating compressors for the air flow needed for cooling.

These are all bar and plate vacuum brazed aluminum coolers to give you the most heat transfer is the smallest space possible, with a low pressure drop.

Feature's:

-2.00" thick core vs competitors 1.75" for more cooling in same space.

-400 psi rated cores vs 250 psi for competitors.

Part Number      A         B         C          D         E

5101                  14.20   17.70    6.80   2.00    1" npt

5102                 14.20   17.70    8.00    2.00   1" npt

5103                 16.20   19.70   10.40   2.00   1" npt

  • all slots are 7/16" x 3/4"
belt guard after coolers